Shad Bikes

Knowing how to fix a puncture on your bike is a necessary skill for urban cyclists. A bicycle puncture can happen at the most inopportune times, and being equipped with the knowledge and tools necessary to repair a bicycle puncture can mean the difference between a brief stop or the end of your ride. At Shad Bikes, we want it to not mean the end of your bike route.

When it comes to fixing a bicycle puncture, speed and efficiency are essential. Therefore, being prepared in advance and knowing the steps to follow to repair a puncture on your bike is not only convenient, but also adds a level of safety and self-sufficiency when cycling. The confidence that comes from knowing that you can handle these mishaps allows you to enjoy your rides with a greater sense of freedom, without the need to rely on assistance services.

  1. Puncture identification

The first step to fixing a puncture on your bike is to precisely locate the source of the problem. Often, a bike puncture can be subtle and not very obvious at first glance, especially if the air leak is slow. In order to repair a puncture on your bike effectively, you need to find the exact location of the damage in the tube of the bike.

If you suspect that there is a puncture on the bike, the first thing is to remove the wheel and check the tire thoroughly for sharp objects such as glass or nails that could have caused the puncture. Sometimes the object that caused the puncture may still be embedded in the tire, and this can give you an immediate clue. If it is not visible to the naked eye, you can inflate the tube and carefully run your hand around the tire to feel the air leak and locate the puncture.

Step by Step

  1. Visual inspection
  2. Check the tire for embedded objects or signs of damage.
  3. Wheel disassembly
  4. Remove the affected wheel from the bicycle.
  5. Examine the camera
  6. Take the tube out of the tire and look carefully to find the hole.
  7. air test
  8. Inflate the chamber and feel or listen for escaping air to detect the leak.
  9. Hole location
  10. Once the leak is detected, mark the point to proceed with the repair.
  1. Preparation for repair

Once you have identified the puncture on your bike, the next step is to prepare to fix it. Before you can repair a bicycle puncture, you will need to remove the tube from inside the tire. This process begins with carefully removing the wheel from the bike, making sure not to cause further damage.

With the wheel off, use levers to carefully remove one side of the tire and access the tube. It is essential to perform this task gently to avoid damaging the tube or tire, which could complicate the process of fixing the puncture on the bike.

Once you have the camera in your hand, it is advisable to inflate it slightly. This makes it easier to find the hole, especially if it was not possible to identify it upon initial inspection. Now you are ready to move on to the next phase, where you will focus on how to fix a bike puncture in an effective and long-lasting way.

Step by Step

  1. Remove the wheel from the bicycle.
  2. Use levers to remove one side of the tire and remove the tube.
  3. Slightly inflate the tube to make it easier to locate the puncture.

3. Hole location

The next critical step in fixing a bike puncture is to accurately locate the hole in the tube. This step is vital, since the success of the bicycle puncture repair depends on it. Sometimes the hole is visible to the naked eye, but other times it may require a little more effort to detect.

Inflate the tube so that the escaping air helps you find the puncture. You can hold the camera close to your cheek or submerge it in water; The bubbles will tell you where the problem is. Once the puncture is found, marking it is essential so as not to lose reference during the process of repairing the puncture on the bicycle.

Step by Step

  1. Inflate the chamber so that air can escape through the hole.
  2. Listen or feel the air to detect the leak.
  3. If necessary, submerge the camera in water and look for bubbles.
  4. Mark the puncture area once you locate it.

4. Puncture repair

With the puncture already located, it is time to get to work and fix the puncture on the bike. This process is essential to be able to continue enjoying your routes without setbacks. To repair a bicycle puncture you will need a repair kit, which usually includes patches, glue, and sandpaper.

The first step is to clean and dry the area around the puncture to ensure that the patch adheres properly. Then, use the sandpaper to gently scrape around the hole. This will create a more porous surface for the glue to work better on. Next, apply a thin layer of glue over the area and wait for it to become tacky to the touch.

Once the glue is ready, place the patch firmly on the area and press firmly for a few minutes. Make sure the edges of the patch are well adhered and there are no air bubbles. Now you have managed to fix the puncture on the bike.

Step by Step

  1. Clean the area around the puncture on the tube.
  2. Lightly sand the area to help the glue adhere.
  3. Apply a thin layer of glue over the sanded area and wait for it to become tacky.
  4. Place the patch on the glue and press firmly.
  5. Make sure the patch is well adhered without air bubbles.

Preventing future punctures

Once you've learned how to repair a bike puncture, it's just as important to know how to minimize the chances of it happening again. Prevention is key and can save you the time and hassle of having to fix bike punctures frequently.

To start, it is advisable to regularly check the condition of your tires and make sure they are not worn or damaged. A good practice is to equip your bicycle with quality tires and tubes, designed to be more resistant to punctures. It is also advisable to maintain proper tire pressure, as incorrect pressure can increase the risk of punctures on your bike.

Our bicycle locks

Shad Bikes accessories for the prepared cyclist

For cyclists who want to equip themselves with the best accessories, Shad Bikes offers a variety of bike accessories that are perfect for being prepared for any eventuality on your routes.

From robust and spacious saddlebags to carry a puncture repair kit, to ergonomic backpacks that make it easy to transport your tools comfortably.

Additionally, Shad Bikes provides high-security locks to protect your bike during your stops and a set of powerful lights to ensure your visibility on the road. With Shad Bikes accessories, you will be equipped not only to fix a bike puncture if necessary, but also to prevent it and enjoy a safe and enjoyable ride.


Learning how to fix a puncture on a bike is a fundamental skill for any cycling fan. Throughout this article, we have explored in detail how to fix a bike puncture, from initial identification of the problem to effective repair. We have seen that repairing a bicycle puncture is not just a matter of skill, but also having the right tools and knowledge to prevent future incidents.

Remember that a puncture on your bike doesn't have to stop your trip if you're prepared. With a little practice, fixing a bicycle puncture can be a quick and easy task. Additionally, taking preventive measures will help you minimize the possibility of these inconveniences occurring.

We hope this article from the Shad Bikes blog has provided you with the necessary information so that the next time you face a puncture on your bike, you can handle it with confidence and efficiency. With the right strategies, fixing a bike puncture will become part of your cycling skill set, allowing you to enjoy your two-wheeled adventures with the peace of mind of knowing that you are prepared for any mishap.